Protective gloves for watch industry / polishing industry
Protection of products against dirt
Single-use gloves to protect products from dirt or staining. They are not guaranteed to protect the wearer.
Work with non-water-based solvents, diluters or cleaners
Gloves resistant to chemical products, manufactured from a variety of materials. The manufacturers usually provide supplementary information on the resistance of the gloves to different chemical products.
Work with various chemical products (protection against accidental contact)
Single-use gloves manufactured from a variety of materials. They must be replaced when they have been contaminated by chemical products. The material of the gloves can be permeated by chemicals after a short period of contact, or it can tear.
General manual work, dry
Gloves for protection against mechanical risks. Many types of gloves conforming to the essential requirements of the standard SN EN 388.
Precision manual work with greasy objects
Textile gloves whose partial coating gives a degree of protection against permanent contact with oil and grease. The correct size is very important for a high level of dexterity.
Warning notice: It is essential to check the resistance of the gloves to specific chemicals by referring to resistance tables
Herein below we give a few guidelines for the use of gloves although we take no responsibility for these recommendations. These guidelines do not replace the analyses of physical and chemical risks at each workplace including proper evaluationof technical specifications supplied by distributors and manufacturers.