Protective gloves for motorcar mechanic / motorcycle mechanic / agricultural vehicle mechanic
Work with non-water-based solvents, diluters or cleaners
Gloves resistant to chemical products, manufactured from a variety of materials. The manufacturers usually provide supplementary information on the resistance of the gloves to different chemical products.
Manual work with dirty or greasy objects, without any particular risk
Single-use nitrile gloves. They must be replaced when they have become contaminated by the product being handled. The material of the gloves may become permeable to chemicals after a short period of contact, or it may tear.
Work with hot objects up to 100°C
Gloves conforming to the standard SN EN 407 for contact with objects up to a temperature of 100 °C
Precision manual work with greasy objects
Textile gloves whose partial coating gives a degree of protection against permanent contact with oil and grease. The correct size is very important for a high level of dexterity.
Warning notice: It is essential to check the resistance of the gloves to specific chemicals by referring to resistance tables
Herein below we give a few guidelines for the use of gloves although we take no responsibility for these recommendations. These guidelines do not replace the analyses of physical and chemical risks at each workplace including proper evaluationof technical specifications supplied by distributors and manufacturers.